If you are looking for the best winch solenoid in the market then you are in the right place. This article will help you to choose your winch solenoid for any type of winches.
Read all the functions of each of them and finally choose the right one for you.
What Is A Winch Solenoid?
On a vehicle-mounted winch, the winch solenoid is an electrical component that activates the winch motor.
The winch valve is designed to produce the appropriate current without destroying the winch switches or the winch engine, despite the high draw of power needed to spin the winch.
The winch solenoid is an electric device engaged when the activation button is pressed, and energy from the battery is delivered to the solenoid.
When the solenoid is activated, the current is sent to the winch motor, which turns the winch drum.
Forward and backward solenoids are used separately in most winches, with the largest winches having four solenoids.
The vehicle-mounted electrical winch motor is identical to the engine starter motor found in many vehicles.
Like the starter that cranks a car’s engine, the winch motor needs the employment of a solenoid to provide the right flow of charge to the engine.
The winch drum is moved in and out by a single winch solenoid in a typical winch.
The heaviest winches have a four-winch solenoid setup and are frequently utilized, with two solenoids acting in sync for both winch orientations.
The winch electromagnet can be installed on the winch or in a distant area, dependent on the winch maker and winch design.
The winch solenoid is often located above the winch engine when placed on the winch. This decreases the chances of chaffing a wire and causing a short in the winch’s power system by eliminating redundant wiring.
Remote-mounted solenoids are more sophisticated, but they protect the solenoid valves from the winch motor’s extreme heat.
This can prevent the winch from shutting down in the middle of a pull owing to the winch solenoid burning.
Aside from saving space, installing remote-mounted hydraulic switches on every winch is advantageous.
The winch has become a smaller compact and requires less space to mount by eliminating the winch solenoid from the front of the winch motor.
A small winch is easier to conceal behind a fender or dust guard and prevent damage.
Many winch problems are caused by damage to the solenoid caused by rocks, uprooted trees, and other debris encountered when riding on trails.
When the solenoid is protected, the winch may be relied on and used when it is needed.
Also check: Starter Relay Vs. Solenoid and Winch Contactor Vs. Solenoid
Top 12 Best Winch Solenoid in 2023
1. KanSmart Winch Solenoid Relay Contactor: Best Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: KanSmart
- Model No: All 12V solenoid operated winches
- Part NO: 10069010
- Material: Alloy steel
- Weight: 1.10 pounds
- Voltage: 12 volts
- Application: 1,500 – 5,000 lbs
KanSmart Winch Solenoid Relay Contactor is robust, weather-resistant steel with a powder-coated black surface for long-lasting toughness.
It meets or exceeds original specifications and is 100% tested before shipment. It can be used as a direct replacement for the solenoid relay contactor switch 12V 250 AMP on your UTV ATV winch.
This 12V winch solenoid relay modifies the winch’s power direction based on the winch switch’s input, allowing the ATV and UTVs electrical systems to be better protected and power distribution switched.
It is pretty simple to set up. 1x winch solenoid relay with 6 protective caps and installation instructions are included in the package.
The solenoid for the Polaris RZR Rancher Sportsman 500 1000 winch has a one-year warranty.
Installation Manual
2. QWORK 12V 250A Winch Solenoid: Best Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: QWORK
- Part NO.: WD3663
- Material: Alloy steel
- Weight: 5.6 ounces
- Voltage: 12 volts
- Application: 3,000 – 5,000 lbs
The QWORK 12V 250A Winch Solenoid Relay Contactor is made of high-quality silver alloy steel for long-term use and has good weather resistance and electrical conductivity.
This solenoid is compatible with all 12-volt solenoid-operated winches, including ATVs, UTVs, SUVs, 4×4 vehicles, and most other recovery winches, such as 12 Volt lift jacks, hydraulic pumps, and trailers.
It is well-designed, with a smooth black surface coated with black powder for added durability and a pleasant feel.
3. MaySpare 250A ATV Winch Solenoid: Best ATV Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: MaySpare
- Model No.: US-250A Winch
- Weight: 1.15 pounds
- Voltage: 12 volts
- Application: 2,000 – 5,000 lbs
MaySpare 250A ATV Winch Solenoid 12V Winch Solenoid Relay Contactor has a capability of 2000-5000lbs.
KFI Winch Kits is a perfect alternative to OEM, Heavy Duty, and Replacement Contactors. As a result of the control-switch position, it reverses the polarity of the winch motor.
The SPDT switch is a momentary center-off. It can take 250 amps of intermittent current for up to 10 seconds, with a 20-30 second cooling interval in between cycles. It’s not difficult to set up.
It is resistant to water and elements and has a thermoplastic shell and a powder-coated black surface for long-lasting use.
MaySpare offers 100 percent high quality and OEM match, direct replacement, and a 6-month warranty, as well as free returns and full refunds.
4. WATERWICH 12V 250A Winch Solenoid Relay Contactor: Best Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: WATERWICH
- Part NO.: WATERWICH-DCJDQ347
- Weight: 1.1 ounces
- Voltage: 12 volts
- Application: 2,000 – 5,000 lbs
The WATERWICH 12V 250A Winch Solenoid Relay Contactor is built of strong, weather-resistant steel with a powder-coated black finish for long life.
The case of this winch solenoid contactor replacement is shatterproof and corrosion-resistant.
It is pretty simple to set up. It can take 250 amps of intermittent current for up to 10 seconds, with a 20-30 second cooling interval in between cycles.
All 12Vsolenoid winches, including ATVs, UTVs, SUVs, Jeeps,4×4 vehicles, and 12V Trailers, can use this 12V 250A Winch Solenoid Relay Contactor.
5. Funmit Winch Solenoid for ATV/UTV 4×4 Vehicles: Best ATV Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: Funmit
- Weight: 1.26 pounds
- Package Dimensions: 4.84 x 2.99 x 2.52 inches
- Application: 2000 to 5000 lbs
The Winch Solenoid is durable weathering steel with a powder-coated black finish for long-lasting performance.
The voltage is 12V, the capacity is 2000-5000lbs, and the stud is 1/4″. Magnetic relay solenoid valve switch for ATV winches 12V 250A 2000lb to 5000lb.
You may replace the Winch Rotor directly, alter the winch power orientation according to the winch switch’s input, and better safeguard the ATV and UTV electrical grid and switch energy distribution.
Compatible with all Polaris, Yamaha, KFI, WARN, RAMSEY, SUPERWINCH, Crosscut MARKER, SITE Indicator 12V winches (swappable part numbers 74900, 63070, 62135, 2875714, 70715), so you don’t have to worry about model incompatibility.
The controller box’s pre-cut carry out this work is simple to attach. The incoming and outgoing switches on the controlling winch are connected by two wires (black and green).
Installation is extremely convenient, saving you time. Black and red to batteries, yellow and blue to the winch, setup are very convenient, saving you time.
Funmit is committed to providing all clients with an easy, streamlined purchasing experience for major appliance replacements and demonstrating that we offer the best parts and services available.
They stand behind our products, and as a company, we put their consumers first.
If you have a quality issue during the 30-day warranty, please feel free to contact Funmit customer support as soon as possible, and we will do everything we can to help you.
6. Ovsor 12V 250A Winch Solenoid Relay Contactor: Best ATV Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: ovsor
- Weight: 1.23 pounds
- Package Dimensions: 4.3 x 2.75 x 4.3 inches; 1.24 Pounds
- Application: 2000 to 5000 lbs
ATV Winch Actuator Relay Contactor Switch 13V 260 A 1500lb to 7000lb Application PRODUCT PARAMETER- Electricity 13V, power 260 A, capacity – 2000-7000lbs.
Composed of weather-resistant metal with a powder-coated black surface for long-lasting durability. KFI’s elevated OEM winch assembly is a great replacement for the contactor.
Simple to set up. The two wires – Blue and Brown – connect to the switch on a winch that regulates In and Out.
The blue and yellow wire goes to the motor, while the black and red wire goes to the battery.
If your product is faulty or you have any other issues, please contact them anytime to resolve the issue within 12 hours. It is also one the best jeep winch solenoid in the market.
8. Triumilynn Winch Solenoid for Warn: Best Warn Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: Triumilynn Parts
- Brand: Triumilynn
- Part No.: 63070
- Weight: 1.08 pounds
- Dimension: 1.97×1.57×1.57 inches
Triumilynn ATV Winch Solenoid is designed with winch motors, snowplows and spreader motors, windlasses, hydraulic pump motors, and other reversible motors.
It has a finely crafted reversing solenoid switch made of ABS and aluminum alloy with long service life and durable performance. This winch solenoid is simple to install and directly replaces the original product.
It is a brand new, premium quality solenoid winch that is an exact replacement for the original parts in the winch.
9. Mile Marker (76-50105-32) ATV Winch Solenoid: Best Mile Marker Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: Mile Marker
- Brand: Mile Marker
- Model No.: 76-50105-32
- Weight: 1.41 pounds
- Part Number: 62135
- Dimension: 4.5x3x3 inches
This Mile Marker ATV Winch Solenoid is Manufactured by MILE MARKER, and its model and part number are 76-50105-32. Mile Marker Industries has been around for over thirty years.
It provides off-road motorists with high-quality, long-lasting hydraulic and electric winches, mounting systems, locking hubs, snatch blocks, shackles, tow, and tow rigging ropes, recovery kits, vehicle accessories, and more.
Their military products are rigorously tested, and each is rated for the industry’s highest break strength standard. They are also made in the United States of America.
10. Mile Marker 77-50141W-31 Winch Solenoid: Best Mile Marker Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: Mile Marker
- Brand: Mile Marker
- Model No.: 77-50141W-31
- Weight: 6.96 pounds
- Part Number: 77-50141W-31.
- Dimension: 9 x 6.75 x 5 inches
This Mile Marker ATV Winch Solenoid’s model and the part number is 77-50141W-31. It provides off-road motorists with high-quality, long-lasting hydraulic and electric winches.
It also has mounting systems, locking hubs, snatch blocks, shackles, tow, and tow rigging ropes, recovery kits, vehicle accessories, and more.
Their military products are rigorously tested, and each is rated for the industry’s highest break strength standard.
They are also made in the United States of America. When it comes to high-quality, highly reliable, and well-tested products for your ATV or 4×4, Mile Marker and our team of professionals are here to help.
11. Kipa Winch Solenoid: Best Polaris Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: KIPA
- Brand: Kipa
- Model No.: 8542122077
- Weight: 1.89 pounds
- Part Number: 62135
- Dimension: 7.99 x 4.84 x 2.56 inches
The kipa Winch Solenoid Relay is manufactured by KIPA, and its model number is 8542122077.
This Winch Contactor Solenoid Relay Rocker Thumb switch Assy is a direct replacement for OEM # 63070, 62135, 74900, 2875714, and 70715.
This has a voltage of 12V and a current of 250A and is very simple to install, modify, or update. This complete winch solenoid kit includes 6 extra insulated waterproof caps and metal brackets.
Kipa is an excellent option if you need to replace a broken contactor. It is suitable for all types of 12-volt solenoid-operated winches, including 4×4 vehicles, ATVs, UTVs, SUVs, Jeeps, and most brands of recovery winches. Other applications include a 12-volt trailer, hydraulic pump, lift jack, and so on.
12. Surwit 500A 12V Winch Solenoid: Best Badland Winch Solenoid
5/5 (Author Rating)
Key Features
- Manufacturer: Surwit
- Part NO.: 12V 500A
- Material: Alloy steel
- Weight: 1.76 POUNDS
- Voltage: 12 volts
- Application: 8,000 – 15,000 lbs
- Cable Length: 3M
Surwit 500A 12V Winch Solenoid Relay may be used for winch motors, snow plow and spreader motors, windlasses, hydraulic pump motors, and other reversible motors, among other things.
Heavy Duty Waterproof Solenoid for 12V to 17,000lb Capacity.
This solenoid works with all 12-volt solenoid-operated winches, including ATVs, UTVs, SUVs, 4×4 vehicles, and most other recovery winches, such as 12-volt lift jacks, hydraulic pumps, and trailers.
It is compatible with 8000lb – 15000lb.
You should be aware of the following fundamentals:
- In almost all common winches, a separate solenoid moves the winch drum.
- A four-winch solenoid mechanism is used in series-wound winches.
- A solenoid is usually located above the winch motor when mounted on a winch. This helps to eliminate extra wiring and create a short in the winch’s electrical circuitry.
- Permanent magnet winches typically have two solenoid mechanisms. It’s because they’re less dependable, less powerful, and far less expensive.
- In most series-wound winches, there are four solenoid mechanisms. It’s because they’re more durable, dependable, and lighter. If you’re on a tight budget, a winch with four solenoids is the way to go.
How to Wire a winch solenoid
- Connect the positive and negative motor wires from the winch to the solenoid.
Connect these wires to the solenoid’s terminals with the appropriate labels. Re-tighten the terminal nuts after reconnecting them.
- Connect the positive and negative battery wires to the terminals on the solenoid allocated for the battery. Keep a watchful eye on the polarity. The red (+) wire should be linked to the positive terminal, while the black (-) wire should be attached to the negative terminal.
- Connect the solenoid’s battery wires to the vehicle’s battery first and then to the correct polarity terminals.
- Connect the wires from the winch’s remote or switch to the proper terminals on the solenoid. These wires are typically color-coded to match the solenoid terminals.
If they aren’t, you’ll have to return to the source to determine their polarity. Make the connections to the solenoid using this information.
How to Test a Winch Solenoid
Removing the solenoids for a comprehensive inspection is a simple task. When reassembling, this provides you the opportunity to clean and double-check that all electrical connections are secure.
Tools required
- Screwdriver set
- Voltmeter
- Wire brush
Precautions
Always remember to unplug the battery before replacing the solenoid cover plate. The battery power is sufficient to cause an electric shock.
Step 1: Before you begin, ensure the line from the winch actuator to the battery is in good working order. You may see that the cables are frayed and need to be replaced.
However, if the cable appears corded, all you have to do is clean it with a wire brush.
Step 2: The next stage is to unplug the positive winch cable (the one with the red color) from the battery. After that, loosen the solenoid’s lid with the screwdriver.
The wire connection to the actuator should be handled with caution. Due to the obvious weak wire, you may notice a clicking sound anytime you move the winch at this point.
Step 3: Next, switch off the winch and use a voltmeter to test the solenoids by touching them to the major studs. The huge studs on the solenoid valves can be found on the side.
The voltmeter will read 12 if everything is in order. This shows that the solenoid is in good functioning order.
Step 4: Now that the large studs have been tested, it’s an opportunity to check the small studs. The little studs are on the opposite side of the winch, with the pulley system above.
Test the little studs and check what the voltmeter displays; if the multimeter shows 12V, like in the previous stage, something is wrong, and things aren’t going properly.
Step 5: Finally, turn on the winch. After you’ve turned on the winch, you’ll need to use another voltmeter to check the huge studs. In Ammeter, there must be no readings.
Step 6: Using the multimeter, get the Impedance reading of the tiny studs. If the solenoid isn’t functioning right, there will be no reading. Whenever the winch is powered up, the little studs are engaged.
How to Bypass Winch Solenoid
Bypassing a winch solenoid is critical if you notice the solenoid system is malfunctioning or if you are troubleshooting the winch engine. It assists you in determining the source of the problem in the winch system.
To bypass a winch solenoid, do the following:
- First, get a good sense of the solenoid system so you can map its terminals and know which ones to bypass.
- Connect a jumper cable to terminal A and F1 or F2 interchangeably with a power source, like a battery.
- Now the engine should move in all directions.
How to Wire a Winch without a Solenoid
Step 1: Obtain A Clear Solenoid Representation
You should be definite about what you want to accomplish in mechanics, focusing on the purpose and expected consequences.
To start wiring a winch without a solenoid, you’ll need to draw a clear picture of the solenoid. At this point, a winch solenoid wiring diagram can help you by demonstrating the motor’s design.
When it’s time to name your wires and terminals, the schematic will come in helpful. The manufacturer or other mechanics can provide a visual depiction with knowledge of your winch type.
Step 2: Set The Winch To Free Spool Mode.
Now, put the winch in a free spool, the same as shifting into neutral gear on your car.
This is done by turning a knob to shift the system around quickly. Before initiating this mode, ensure the winch is not loaded to avoid an accident.
Step 3: Terminals Need To Be Unplugged
Starting with the positive lead, disconnect the terminals from the battery. However, you should keep the grounded lead engaged.
Name the cables on the diagram to avoid any confusion that could lead to inaccurate findings.
To help you detach the terminals, bring a set of pliers or a spanner. The three posts near the motor should be labeled A, F1, and F2.
Step 4: Connect The Jumper Wires
Bring your jumper wires for the following stage, which just requires a 5-6-inch cable.
Connect the connection from point A to F1 and F2 to the battery. The winch motor should only run in one direction once you’ve completed this connection.
Step 5: Take A Look At The Other Articles.
Before connecting it to the power supply via the F1 post, repeat the procedure with the A and F2 posts. The motor will run on the opposite side after the connection is complete.
These are the procedures to determine if your winch solenoid needs to be replaced.
It’s a good way to figure out what’s wrong with your winch solenoid. The fault could be with the switch if the motor runs in both directions.
Also check: other Winch accessories
FAQ
best place to mount winch solenoid?
Under the dash is the best place to install winch solenoid.
Do you have to use solenoid on a winch?
No, But it’s recommended to use a solenoid to avoid winch overload.
Is it better to use two or four solenoids?
As previously stated, some winches employ four solenoids while others employ only two. The number of solenoids required is determined by the power and motor of the winch.
More solenoids are required for larger winches. These winches are typically powered by a series wound motor.
A more dependable and powerful four-winch solenoid arrangement is the better option if you have the money.
Winches with only two solenoids are weaker and less dependable. However, they are less expensive. They include a permanent magnet motor.
Conclusion
So, we all get to know through this article a lot about winch solenoids, not just their meaning or how to test them but also about the Top 12 best winch solenoids available in the market.
Hope this helps you choose the best winch solenoid for you, as per your requirements.
